4. Add tables

<< Click to Display Table of Contents >>

Navigation:  PerfectTablePlan 6.0.0 > Getting started > Tutorial >

4. Add tables

The next step is to add some tables for the guests to sit at. Click on the flowarrow3_163.Tables button in the Task tool bar. Click on the table_head_16Insert Head Table button in the Insert tool bar.

insert_head_table_m

The table_head_16Insert Head Table window will appear.

insert_head_table_window_m

Click the Add button. A long rectangular table with 8 seats down one side will now appear near the centre of the floor_plan_16Floor Plan pane.

floor_plan_new_table_m

Click on the table_circular_16Insert Circular Table button in the left Insert tool bar. The table_circular_16Insert Circular Table window will appear. Change Seats to 6 and Create to 2.

insert_circular_table_window_m

Leave the auto box checked to allow PerfectTablePlan to set a table size based on the number of seats and the Seat width set in the ruler_16Dimensions window.

Next to the Create field you can see how many seats you will have after the tables have been added, in this case 20 seats.

Click the Add button. Two circular tables, each with 6 seats, will now appear in the floor_plan_16Floor Plan pane. Click the zoom_back_16 Zoom so all tables visible button at the top of the floor_plan_16Floor Plan pane to centre and zoom on the tables you have added.

Drag the tables to the approximate positions shown below. Currently both tables are selected. Left-click and release on a table to select just that table. Left-click on the table again and, holding down the mouse button, drag it to the desired position and release. Repeat for the other table.

floor_plan_new_table_2_m

Experiment with zooming in and out using the zoom_in_16 and zoom_out_16 buttons and scrolling the scroll bars.

Note You can also use the mouse wheel (if you have one) for zooming or scrolling (depending on the setting in the prefs_16Preferences window).

You can change the size of the floor plan using the ruler_16 button or by dragging the bottom-right corner of the room. This allows you to enter the dimensions of the venue in which the event will take place.

drag-resize-floor-plan

You can add lines, shapes, images and text to the floor plan by clicking on the walls_16, shape_16, image_16 and add_text_16 buttons.

You can rotate a table, shape or text by clicking the rotate_16 button. You can move a table, shape or text behind another by clicking the move_to_back_16 button.

You can change the colours and fonts in the floor plan by clicking the colours_and_fonts_16 button at the top of the pane.

The Status bar now shows that you have 7 guests and 20 seats:

statusbar_2_m

Click on the flowarrow1_161.Guests button in the Task tool bar. Add another 11 guests using the same approach as in Tutorial section 2, so that you have a total of 18 guests. Set any groups, names, genders and proximities you like.

Click on the flowarrow3_163.Tables button in the Task tool bar. You should now have 18 guests and 20 seats. Right-click on the head table in the floor_plan_16Floor Plan pane and select props_16Properties.

select_table_properties_m

Change the number of seats to 6. Click the OK button.

There are now 18 seats and 18 guests.

Select File>save_16Save to save the plan.

Note PerfectTablePlan creates a backup file every time you save the plan (unless you have disabled this in the prefs_16Preferences window). This is useful if you ever need to retrieve an old version of the plan.

Next: 5. Assign guests >>